[cisco-voip] Strange secondary dialtone after upgrading to CCM 4.1(3) SR5b

[kent]

Check all your route patterns that use the secondary dial tone check 
mark.  Chances are one of them is missing the secondary dial tone 
checkbox, so the pattern does not  play the secondary tone till further 
down the route list.


Paul Choi wrote:
> I'm not sure if the service release is the cause or
> not but since it is the only change that was made
> before this issue arose, it is very suspicious.
>
> Users used to get a secondary dialtone after 9 when
> dialing a 91+tendigitLDnumber. Now they get a
> secondary dialtone, even on a softphone, when dialing
> 91+firstSevenDigitsofLDnumber. Has anyone else
> encountered this issue? If so, were you able to
> resolve it somehow?
>
>
>        
> ____________________________________________________________________________________
> Sick sense of humor? Visit Yahoo! TV's 
> Comedy with an Edge to see what's on, when. 
> http://tv.yahoo.com/collections/222
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>