[cisco-voip] PRI + FXS cards + fax/modem

[Tim Jackson]

I use an IAD2431 (not a 3845) to do this... Works perfect with modem or
whatever.. Just have a dial-peer pointing to 1/1:0 or whatever analog port
we need to ues...

T1 in (PRI)
T1 out (CAS) to a channel bank...

controller T1 1/0
 framing esf
 linecode b8zs
 pri-group timeslots 1-24
!
controller T1 1/1
 mode cas
 framing esf
 linecode b8zs
 ds0-group 0 timeslots 1 type fxs-loop-start
 ds0-group 1 timeslots 2 type fxs-loop-start
 ds0-group 2 timeslots 3 type fxs-loop-start
 ds0-group 3 timeslots 4 type fxs-loop-start
 ds0-group 4 timeslots 5 type fxs-loop-start
 ds0-group 5 timeslots 6 type fxs-loop-start
 ds0-group 6 timeslots 7 type fxs-loop-start
 ds0-group 7 timeslots 8 type fxs-loop-start
!





On 7/16/07, Paul Choi <asobihoudai at yahoo.com> wrote:
>
> Is it true that trying to attach a FAX machine to an
> FXS card on a 3845 will not transmit properly when the
> primary PSTN connection is an ISDN PRI connection?
>
> This is what I have experienced at a customer's office
> in South Dakota. Half of their faxes would fail. The
> customer then installed straight analog lines and then
> all faxes would transmit without issue.
>
>
>
>
> ____________________________________________________________________________________
> Bored stiff? Loosen up...
> Download and play hundreds of games for free on Yahoo! Games.
> http://games.yahoo.com/games/front
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070716/9f56f7e7/attachment-0001.html