[cisco-voip] SRST with no h323 dial-peers

[Jason Aarons (US)]

If a router has a T1 PRI gateway registered with CallManager using MGCP
but no H323 dial-peers configured in the router, then I don't expect
SRST to work.  Anyone disagree? Using CallManger 4.1.3 and IOS 12.4.11T.

 

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070717/5e0564bf/attachment-0001.html