[cisco-voip] SRST with no h323 dial-peers

[Erick Bergquist]

It seems that SRST is an afterthought from my experiences and it's not
tested well, and it takes an outage to discover that. Or, what they
wanted to happen is something else then what was discussed.

My 2 cents

On 7/17/07, Jason Aarons (US) <jason.aarons at us.didata.com> wrote:
>
>
>
>
> Outbound dialing should require H323 dial peers for SRST, I'm not sure how
> the installed solution "passed" acceptance testing while under SRST mode by
> the customer. It was installed sometime ago, and I guess they have never
> been in SRST mode and would find out it's broken then.
>
>
>
>
>
> From: Avner Izhar [mailto:aizhar at ccbootcamp.com]
>  Sent: Tuesday, July 17, 2007 2:27 AM
>  To: Jason Aarons (US); cisco-voip at puck.nether.net
>  Subject: RE: [cisco-voip] SRST with no h323 dial-peers
>
>
>
>
>
>
> Agree for srst outbound functionality.
>
>
>
>
>
> With that being said, I had customers who only needed to preserve internal
> dialing while in srst mode and for them you can do with the scenario you
> described.
>
>
>
>
>
> Is that what you intended, or am I missing something here?
>
>
>
>  ------------------------------------------- Regards, Avner
> Izhar Technical Instructor CCIE #15999 (Voice) Voice: (702) 968-5100 Fax:
> (702) 446-8012 E-mail: aizhar at ccbootcamp.com Network Learning Inc
> ________________________________
>  From: cisco-voip-bounces at puck.nether.net on behalf of
> Jason Aarons (US)
>  Sent: Tue 7/17/2007 4:58 AM
>  To: cisco-voip at puck.nether.net
>  Subject: [cisco-voip] SRST with no h323 dial-peers
>
>
> If a router has a T1 PRI gateway registered with CallManager using MGCP
>  but no H323 dial-peers configured in the router, then I don't expect
>  SRST to work.  Anyone disagree? Using CallManger 4.1.3 and IOS 12.4.11T.
>
>
> ________________________________
>
>
>
>
>  Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>