[cisco-voip] SRST with no h323 dial-peers

[Lelio Fulgenzi]

like Riker said, "Yes, absolutely, I do indeed concur wholeheartedly."
  ----- Original Message ----- 
  From: Jason Aarons (US) 
  To: cisco-voip at puck.nether.net 
  Sent: Tuesday, July 17, 2007 1:30 AM
  Subject: [cisco-voip] SRST with no h323 dial-peers


  If a router has a T1 PRI gateway registered with CallManager using MGCP but no H323 dial-peers configured in the router, then I don't expect SRST to work.  Anyone disagree? Using CallManger 4.1.3 and IOS 12.4.11T.

   

   



------------------------------------------------------------------------------


  Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you. 



------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070717/aad9d236/attachment-0001.html