[cisco-voip] Can CCME be used for SRST purposes?

[Paul Choi]

My understanding is that it costs the same but you
will get a max of 240 phone fallback instead of 900+.
I will have to read this document carefully to make
sure we're not barking up the wrong tree.

--- Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

> take a look closely at the requirements of using CME
> as SRST. i don't like 
> the restrictions, so we went with pure SRST if you
> can call it that.
> 
> in particular, the extra configuration steps, plus
> the difference in total 
> number of supported phones during the WAN outage. it
> might give you more 
> features, but we're hoping that there won't be so
> many WAN outages.
> 
> I believe it costs a bit more too.
> 
> ----- Original Message ----- 
> From: "Paul Choi" <asobihoudai at yahoo.com>
> To: <cisco-voip at puck.nether.net>
> Sent: Monday, July 23, 2007 9:31 PM
> Subject: Re: [cisco-voip] Can CCME be used for SRST
> purposes?
> 
> 
> >
>
http://www.cisco.com/en/US/partner/products/sw/voicesw/ps4625/products_configuration_guide_chapter09186a00807e0566.html
> >
> > I found my answers here.
> >
> >
> >
> >
>
____________________________________________________________________________________
> > Building a website is a piece of cake. Yahoo!
> Small Business gives you all 
> > the tools to get online.
> > http://smallbusiness.yahoo.com/webhosting
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> >
> https://puck.nether.net/mailman/listinfo/cisco-voip
> > 
> 
> 



       
____________________________________________________________________________________
Be a better Globetrotter. Get better travel answers from someone who knows. Yahoo! Answers - Check it out.
http://answers.yahoo.com/dir/?link=list&sid=396545469