[cisco-voip] Incoming call not receiving on SRST mode

Manoj Kalpage manoj.kalpage at gmail.com
Tue Jul 24 11:25:29 EDT 2007


Hi Chris,
Here are the configuration for SRST side voice gateway and head office
side MGCP Gateway configurations.

Thanks,
Manoj


*********** SRST CONFIG ******************************
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname TEST01
!
boot-start-marker
boot-end-marker
!
enable password xxxxxxxxx
!
aaa new-model
!
!
aaa authentication login userauth local
!
!
aaa session-id common
clock timezone jst 9
network-clock-participate wic 0
ip cef
!
!
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.9.200 192.168.9.254
ip dhcp excluded-address 192.168.9.1 192.168.9.99
ip dhcp excluded-address 192.168.7.151 192.168.7.254
ip dhcp excluded-address 192.168.7.1 192.168.7.99
!
ip dhcp pool DATA
  network 192.168.9.0 255.255.255.0
  default-router 192.168.9.1
  dns-server 61.122.112.97
  lease 14
!
ip dhcp pool VOICE
  network 192.168.7.0 255.255.255.0
  domain-name write
  dns-server 172.16.0.10
  default-router 192.168.7.1
  option 150 ip 172.16.0.10
  lease 14
!
!
ip domain name xxx.com
!
multilink bundle-name authenticated
!
isdn switch-type ntt
!
voice-card 0
!
!
!
voice translation-rule 1
 rule 1 /1602/ /0335119981/
 rule 2 /1607/ /0335119982/
 rule 3 /1609/ /0335119983/
!
voice translation-rule 2
 rule 1 /35119981/ /1602/
 rule 2 /35119982/ /1607/
 rule 3 /35119983/ /1609/
!
!
voice translation-profile ANI
 translate calling 1
!
voice translation-profile DNIS
 translate called 2
!
!
!
policy-map AutoQoS-Policy-Trust
 class class-default
 fair-queue
policy-map Shape-20MB
 class class-default
 shape average 20000000
 service-policy AutoQoS-Policy-Trust
!
!
crypto isakmp policy 10
 encr 3des
 hash md5
 authentication pre-share
 group 2
crypto isakmp key 6 xxxxxx address 210.210.210.210 no-xauth
!
!
crypto ipsec transform-set KAM esp-3des esp-md5-hmac
!
crypto ipsec profile GREPRO
 set transform-set KAM
!
!
interface Tunnel0
 description ******* Tunnel to Main Office *********
 bandwidth 2000
 ip address 10.0.22.2 255.255.255.0
 ip nbar protocol-discovery
 tunnel source FastEthernet0/1
 tunnel destination 210.210.210.210
 tunnel mode ipsec ipv4
 tunnel protection ipsec profile GREPRO
 service-policy output Shape-20MB
!
interface FastEthernet0/0
 no ip address
 ip nat inside
 no ip virtual-reassembly
 duplex auto
 speed auto
!
interface FastEthernet0/0.10
 encapsulation dot1Q 10 native
 ip address 192.168.9.1 255.255.255.0
 ip nat inside
 ip virtual-reassembly
 ip tcp adjust-mss 1400
!
interface FastEthernet0/0.20
 encapsulation dot1Q 20
 ip address 192.168.7.1 255.255.255.0
 ip nat inside
 ip virtual-reassembly
 ip tcp adjust-mss 1400
!
interface FastEthernet0/1
 description ****** INTERNET **********
 bandwidth 2000
 ip address 124.124.124.124 255.255.255.248
 ip nat outside
 no ip virtual-reassembly
 ip route-cache flow
 ip tcp adjust-mss 1400
 speed 100
 full-duplex
!
interface BRI0/0/0
 no ip address
 isdn switch-type ntt
 isdn point-to-point-setup
 isdn incoming-voice voice
 isdn map address .* plan unknown type unknown
!
interface BRI0/0/1
 no ip address
 isdn switch-type ntt
 isdn point-to-point-setup
 isdn incoming-voice voice
 isdn map address .* plan unknown type unknown
!
interface Dialer0
 no ip address
!
ip route 0.0.0.0 0.0.0.0 124.39.174.233
ip route 10.0.0.0 255.255.255.0 Tunnel0
ip route 172.20.0.0 255.255.0.0 Tunnel0
!
!
ip http server
no ip http secure-server
ip nat inside source list 102 interface FastEthernet0/1 overload
!
access-list 102 permit ip 192.168.7.0 0.0.0.255 any
access-list 102 permit ip 192.168.9.0 0.0.0.255 any
!
!!
control-plane
!
!
!
voice-port 0/0/0
!
voice-port 0/0/1
!
!
!
dial-peer voice 1 pots
 destination-pattern 0110
 port 0/0/0
 forward-digits 3
!
dial-peer voice 2 pots
 destination-pattern 0T
 port 0/0/0
!
dial-peer voice 3 pots
 incoming called-number .
 direct-inward-dial
 port 0/0/0
!
!
!
!
call-manager-fallback
 secondary-dialtone 0
 max-conferences 8 gain -6
 transfer-system full-consult
 timeouts interdigit 3
 ip source-address 192.168.7.1 port 2000
 max-ephones 24
 max-dn 48
 voicemail 00345501603
 moh music-on-hold.au
 time-format 24
!
!
line con 0
line aux 0
line vty 0 4
 transport input telnet ssh
!
scheduler allocate 20000 1000
ntp clock-period 17178208
ntp update-calendar
ntp server 202.202.202.222 prefer
end

**************** HEAD OFFICE MGCP GATEWAY *************************


Building configuration...

Current configuration : 3649 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname PBXLMGCP01
!
boot-start-marker
boot-end-marker
!
logging buffered 5000000 debugging
no logging console

!
network-clock-participate wic 0
network-clock-participate wic 1
network-clock-select 1 T1 0/0/0
no aaa new-model
ip subnet-zero
!
!
ip cef
!
!
ip flow-cache timeout active 1
ip domain name pbxl.jp
no ftp-server write-enable
isdn switch-type primary-4ess
!
voice-card 0
 no dspfarm
!
!
!
!
!
!
!
!
!
!
!
voice translation-rule 10
 rule 1 /^\(.*\)/ /033523\1/
!
voice translation-rule 20
 rule 1 /^\(.*\)/ /0\1/
 rule 2 /35115141/ /8000/
 rule 3 /35115142/ /8000/
!
!
voice translation-profile 10
 translate calling 10
!
voice translation-profile 20
 translate calling 20
!
!
ccm-manager redundant-host 172.16.0.13
ccm-manager mgcp
ccm-manager music-on-hold
ccm-manager config server 172.16.0.10
ccm-manager config
!
!
!
!
controller T1 0/0/0
 framing esf
 linecode b8zs
 pri-group timeslots 1-24 service mgcp
 description ######### T1 VOICE KVH #########
!
!
!
interface FastEthernet0/0
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface FastEthernet0/1
 ip address 172.16.0.1 255.255.0.0
 ip nbar protocol-discovery
 ip route-cache flow
 duplex auto
 speed auto
 h323-gateway voip bind srcaddr 172.16.0.1
!
interface Serial0/0/0:23
 no ip address
 isdn switch-type primary-ntt
 isdn incoming-voice voice
 isdn bind-l3 ccm-manager
 no cdp enable
!
interface BRI0/1/0
 no ip address
 isdn switch-type ntt
 isdn incoming-voice voice
 isdn map address .* plan unknown type unknown
!
interface BRI0/1/1
 no ip address
 isdn switch-type ntt
 isdn incoming-voice voice
 isdn map address .* plan unknown type unknown
!
ip classless
ip route 0.0.0.0 0.0.0.0 172.16.0.2
!
ip flow-export source FastEthernet0/1
ip flow-export version 5
ip flow-export destination 172.16.0.14 9996
!
ip http server
no ip http secure-server
!
snmp-server community public RO
snmp-server ifindex persist
!
!
!
control-plane
!
!
!
voice-port 0/0/0:23
 cptone JP
!
voice-port 0/1/0
 cptone JP
!
voice-port 0/1/1
 cptone JP
!
mgcp
mgcp call-agent 172.16.0.10 2427 service-type mgcp version 0.1
mgcp rtp unreachable timeout 1000 action notify
mgcp package-capability rtp-package
no mgcp package-capability res-package
mgcp package-capability sst-package
no mgcp package-capability fxr-package
mgcp package-capability pre-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp fax t38 inhibit
mgcp rtp payload-type g726r16 static
mgcp bind control source-interface FastEthernet0/1
mgcp bind media source-interface FastEthernet0/1
!
mgcp profile default
!
!
!
dial-peer voice 101 pots
 preference 1
 destination-pattern 0T
 incoming called-number .T
 direct-inward-dial
 port 0/1/0
!
dial-peer voice 102 pots
 preference 2
 destination-pattern 0T
 incoming called-number .T
 direct-inward-dial
 port 0/1/1
!
dial-peer voice 201 voip
 translation-profile incoming profile20
 preference 1
 destination-pattern 3523....
 session target ipv4:172.16.0.10
 incoming called-number .
 dtmf-relay h245-alphanumeric
 fax protocol pass-through g711ulaw
 no vad
!
no dial-peer outbound status-check pots
!
!
call-manager-fallback
 max-conferences 8
!
!
line con 0
line aux 0
line vty 0 4
 timeout login response 300
 absolute-timeout 60
 login local
 transport input telnet ssh
!
scheduler allocate 20000 1000
!
end




On 7/24/07, Clouse, Chris <chris.clouse at berbee.com> wrote:
> Could you send me your configuration?  I'll take a look at it.
>
> Christopher Clouse, CCNP CCDP CCVP MCP Network+
>
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Manoj Kalpage
> Sent: Tuesday, July 24, 2007 1:41 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Incoming call not receiving on SRST mode
>
> Hi All,
> We have Call Manager 4.1 implementation on main office and branch
> office has SRST voice gateway. When WAN up everything working normal
> but WAN fails SRST site phones can make call over local BRI but they
> are not receiving incoming calls. As main office cannot find SRST
> phones, all incoming calls to those numbers are get forward to voice
> mail. I thought AAR can be used for SRST but it seems to be not. Has
> anyone come a cross this kind of situation? Any kind of information
> would be greatly appreciated.
>
> Best Regards,
> Pere
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>


More information about the cisco-voip mailing list