[cisco-voip] Seggregation of Pri for inbound and outbound dialing..

[Johnny Crothers (c)]

You can limit the outbound calls with the controller configuration,
timeslot configuration. 

 

The inbound will be controlled by the telco.

 

What I would do would be to find out what the hunting method the Telco
is using, top-down, or bottom up and configure the CCM(Assuming MGCP)
for the opposite.

 

 

 

Johnny Crothers

IPT Specialist

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
Mudassar.Khalid/NE/Lahore
Sent: 31 July 2007 09:55
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Seggregation of Pri for inbound and outbound
dialing..

 

Hi all,

I want to segregate PRI in such way that i could use channel 1 to 10 for
inbound calls and 11 to 21 for outbound calls.Can anyone tell me about
the possibility of this scenario and if yes then how it would be
possible?(A guidline for configuration)

 

Kind Regards,

Mudassar Khalid

Network support Engineer

O&M Lahore NEPL

Cell : (0092) 0322-4481004



**********************************************************************
Any opinions expressed in the email are those of the individual and not necessarily the company. This email and any files transmitted with it are confidential and solely for the use of the intended recipient.  If you are not the intended recipient or the person responsible for delivering it to the intended recipient, be advised that you have received this email in error and that any dissemination, distribution, copying or use is strictly prohibited.

If you have received this email in error, or if you are concerned with the content of this email please e-mail to: e-security.support at vanco.info

The contents of an attachment to this e-mail may contain software viruses which could damage your own computer system. While the sender has taken every reasonable precaution to minimise this risk, we cannot accept liability for any damage which you sustain as a result of software viruses. You should carry out your own virus checks before opening any attachments to this e-mail. 

Vanco UK Ltd Registered in England No: 2296733 Registered Office: John Busch House, 277 London Road, Isleworth, Middlesex TW7 5AX

Please consider the environment before printing this e-mail
**********************************************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070731/4bcf2cd6/attachment.html