[cisco-voip] VGW over VPN

[Justin Steinberg]

tftp is used for mgcp config download and by default tftp is sourcing
from the egress interface and if that isnt routable to ccm then the
mgcp download fails.

bind your tftp to the same LAN interface via

ip tftp source-interface fax/x

Justin


On 10/2/07, Scott Voll <svoll.voip at gmail.com> wrote:
> I have the following topology
>
> LAN -- VGW -- MetroE -- VPN Concentrator -- layer 3 switch -- CM
>
> I have two ethernet interfaces on the VGW.  I have bound the voice stuff to
> the LAN side of the VGW.  all works fine except I can't update the VGW
> config via MGCP.  I'm guessing that the ccm-manager stuff is binding to the
> wrong interface as all voice stuff works correctly.  it's just new changes
> like what phone to ring.  The are all FXO ports.
>
> Give me an idea as to why the configs don't download.
>
> I have all the normal ccm, mgcp, commands.  its just changes i'm having
> issues with.
>
> Thanks
>
> Scott
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>