[cisco-voip] Hookflash issue on VG224

[MILLS, Mark]

Hi All,
 
I seem to have an issue with hookflash not working on an analog phone
connected to a VG224.

I have tried changing the timing hookflash-in settings on the voice
port, but it does not seem to help too much.   I even extended them out
to the far ends of 1550 and 1 to see if it helps, and no go.

I am not exactly sure what I am doing wrong?

The config on the voice-port is below:

voice-port 2/22
 ren 3
 idle-voltage low
 disc_pi_off
 input gain 10
 output attenuation 10
 playout-delay minimum low
 cptone AU
 timing hookflash-in 1550 0
 timing digit 53
 bearer-cap Speech
 station-id number xxxxxx
 caller-id enable
!


Below is the output of debug vpm signal if its any help?

Oct 15 08:21:28.381 CST: [2/22] c2400_report_sig_state: ABCD = 0x4
Oct 15 08:21:28.381 CST: port 22 changed state new state = 4
Oct 15 08:21:28.385 CST: htsp_process_event: [2/22, FXSLS_CONNECT,
E_DSP_SIG_010
0]fxsls_offhook_onhook, HF duration Max=1550, HF duration Min=1
Oct 15 08:21:28.385 CST: htsp_timer - 1550 msec
Oct 15 08:21:28.485 CST: [2/22] c2400_report_sig_state: ABCD = 0xC
Oct 15 08:21:28.485 CST: port 22 changed state new state = 12
Oct 15 08:21:28.489 CST: htsp_process_event: [2/22, FXSLS_CONNECT,
E_DSP_SIG_110
0]fxsls_offhook_offhookhtsp_hook_flash_ind
Oct 15 08:21:28.489 CST: htsp_timer_stop
Oct 15 08:21:29.573 CST: htsp_digit_ready(2/22): digit = 6
Oct 15 08:21:29.773 CST: htsp_digit_ready(2/22): digit = 7
Oct 15 08:21:30.193 CST: htsp_digit_ready(2/22): digit = 6

Any pointers in where to look is appreciated, you guys are very helpful
:)


Thanks,
   Mark
"Warning:
The information contained in this email and any attached files is
confidential to BAE Systems Australia. If you are not the intended
recipient, any use, disclosure or copying of this email or any
attachments is expressly prohibited.  If you have received this email
in error, please notify us immediately. VIRUS: Every care has been
taken to ensure this email and its attachments are virus free,
however, any loss or damage incurred in using this email is not the
sender's responsibility.  It is your responsibility to ensure virus
checks are completed before installing any data sent in this email to
your computer."