[cisco-voip] SRST automatically set to G.729 CODEC instead of G.711

[Jonathan Charles]

The default codec for a voip dial peer is G.729...

add

codec g711ulaw

to your voip dial peers



Jonathan


Jonathan

On Tue, Apr 15, 2008 at 10:41 AM, Perera, Manoj (GE, Corporate)
<manoj.perera at ge.com> wrote:
>
>
> Hi All,
> We have SRST router configured at remote site which has PVDM2-8 for 4 BRI
> lines. This should support 8 simultaneous call when use G.711 codec. At call
> manager side we have separate device pool for this site with region codec
> G.711. All PSTN call from branch office go directly out from SRST router BRI
> interfaces. The issue is Calls to PSTN from branch office use G.729 instead
> of G.711 and number of simultaneous call drop to 5 calls as it use G.729.
> When we use SRST router to use G.711, simultaneous calls increases to 8
> calls but MOH stop functioning. Has anyone had experience this kind of
> problem? Any information would be greatly appreciated.
>
> Thanks,
> MK
>
>
> _______________________________________________
>  cisco-voip mailing list
>  cisco-voip at puck.nether.net
>  https://puck.nether.net/mailman/listinfo/cisco-voip
>
>