[cisco-voip] SRST automatically set to G.729 CODEC instead of G.711

[Matthew Saskin]

For your first issue (calls outbound using G.729), check to see what 
region you have the voice gateway in.  Sounds like you probably have the 
voice gateway in a different region than your phones (within 
CallManager) and the region settings are for G.729 between them.

-matt

Perera, Manoj (GE, Corporate) wrote:
> Hi All,
> We have SRST router configured at remote site which has PVDM2-8 for 4 
> BRI lines. This should support 8 simultaneous call when use G.711 
> codec. At call manager side we have separate device pool for this site 
> with region codec G.711. All PSTN call from branch office go directly 
> out from SRST router BRI interfaces. The issue is Calls to PSTN from 
> branch office use G.729 instead of G.711 and number of simultaneous call 
> drop to 5 calls as it use G.729. When we use SRST router to use G.711, 
> simultaneous calls increases to 8 calls but MOH stop functioning. Has 
> anyone had experience this kind of problem? Any information would be 
> greatly appreciated.
>  
> Thanks,
> MK
>  
>  
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip