[cisco-voip] Antw: Re: CFA to predefined number

[Robert Schuknecht]

Hi Lelio,

i had the same idea but it did not work. after i pressed the CFA Softkey i heard the dialtone, but nothing happend.


>>> Lelio Fulgenzi<lelio at uoguelph.ca> schrieb am Mittwoch, 16. April 2008 um 12:46
in Nachricht b2fb97e5877855e52bcf79e9cea16ec7:
> Try creating a blank translation to the destination - put it in a partition 
> that is the only partition in a specific CSS then assign this CSS to the 
> forwarding search space.
> 
> It might work.
> 
> Basically the same steps as creating a plar.
> 
> --------------------------------------------------------------------------------
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "Bad grammar makes me [sic]" - Tshirt
> 
> ----- Original Message ----- 
> From: "Robert Schuknecht" <rschuknecht at gmx.de>
> To: "Cisco-VoIP PuckNetherNet" <cisco-voip at puck.nether.net>
> Sent: Wednesday, April 16, 2008 4:46 AM
> Subject: [cisco-voip] CFA to predefined number
> 
> 
>> Hi List,
>>
>> is it possible to restrict CallForwardAll to an predefined number, so the 
>> user has only to press the CFA Softkey and all calls are forwarded to an 
>> predefined number?
>>
>> Any hints and ideas are welcome!
>>
>> /Robert
>>
>>
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net 
>> https://puck.nether.net/mailman/listinfo/cisco-voip 
>>