[cisco-voip] DMA 4.2 to 6.x staging !!!

[Matthew Saskin]

Hostname can change during a 4.x -> 6.x migration without issue.

-matt

Djokic Sinisa wrote:
>
> hi crew..
>
>  
>
> i'm staging for migration from CCM 4.2 to UCCM 6.x cluster and i did 
> DMA export..
>
> so during UCCM 6.0 install when it asked me for a hostname i tried to 
> enter the old one but it didn't excepted it obviously the old hostname 
> has underscores in it..
>
> it's like COMPANY_CCM_X..
>
> so i entered new one..
>
> is that going to cause problems?..beacuse of the DMA export fiule 
> containg old hostname..IP address remained the same..
>
> i'm in the middle of it so i don't have any results yet..
>
> if it would cause problems what's the soluton..
>
> i do sincerely hope it;s not the fresh install..
>
>  
>
>  
>
> thanx..
>
>  
>
> regards..
>
>  
>
>  
>
> **Sinisa Djokic**
>
> System Engineer
> CCNP,CCDA,CQS-CWLDS,CS-CIPTDS,CS-CIPCCES Cisco Certified
>
>  
>
> 	
>
>  
>
> 	
>
> MDS Informaticki inzenjering
> Bul. Arsenija Carnojevica 170
> 11070 Novi Beograd, Serbia
> Tel: +381 11 2015 200, 2015 273
> Fax: +381 11 3194 954
> www.mds.rs <http://www.mds.rs>
> sdjokic at mds.rs <mailto:sdjokic at mds.rs>
>
>  
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>