[cisco-voip] DMA 4.2 to 6.x staging !!!

[Jonathan Charles]

I would argue since the DMA is migrating from a Windows NETBIOS naming
convention to a Linux DNS convention, the DMA should have a function
to allow you to remove the evil underscore...



jonathan

On Thu, Apr 17, 2008 at 9:27 AM, Jonathan Charles <jonvoip at gmail.com> wrote:
> Gee, at least they weren't dicks about it...
>
>
>
>  Jonathan
>
>  On Thu, Apr 17, 2008 at 9:30 AM, Jason Aarons (US)
>
> <jason.aarons at us.didata.com> wrote:
>  >
>  >
>  >
>  >
>
>
> > I opened a tac case and was told it was by-design (my hostname started with
>  > a number which failed)  thus they wouldn't file a bug id even though the
>  > Help says any alphanumeric character is acceptable. They sent me a link to
>  > the original dns rfc.
>  >
>  >
>  >
>  >  ________________________________
>  >
>  >
>  > From: cisco-voip-bounces at puck.nether.net
>  > [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voice Noob
>  >
>  >  Sent: Thursday, April 17, 2008 9:52 AM
>  >  To: Jonathan Charles
>  >
>  > Cc: cisco-voip at puck.nether.net
>  >  Subject: Re: [cisco-voip] DMA 4.2 to 6.x staging !!!
>  >
>  >
>  >
>  >
>  >
>  > Is this _ problem documented somewhere on Cisco.com? I find it hard to
>  > accept that you could not use an _ for the DMA export.
>  >
>  >
>  > On Thu, Apr 17, 2008 at 8:34 AM, Jonathan Charles <jonvoip at gmail.com> wrote:
>  >
>  > Please do not say that you had an underscore in your old hostname...
>  >
>  >  Because if you do, you cannot run DMA.
>  >
>  >  We ran into this a few months ago on a 4.1 - 6.0 upgrade and we ended
>  >  up having to export everything via BAT and reimporting... TAC said an
>  >  underscore means DMA cannot be used.
>  >
>  >
>  >
>  >  Jonathan
>  >
>  >
>  >
>  >
>  >
>  >
>  >  On Thu, Apr 17, 2008 at 7:51 AM, Djokic Sinisa <sdjokic at mds.rs> wrote:
>  >  >
>  >  >
>  >  >
>  >  >
>  >  > hi crew..
>  >  >
>  >  >
>  >  >
>  >  > i'm staging for migration from CCM 4.2 to UCCM 6.x cluster and i did DMA
>  >  > export..
>  >  >
>  >  > so during UCCM 6.0 install when it asked me for a hostname i tried to
>  > enter
>  >  > the old one but it didn't excepted it obviously the old hostname has
>  >  > underscores in it..
>  >  >
>  >  > it's like COMPANY_CCM_X..
>  >  >
>  >  > so i entered new one..
>  >  >
>  >  > is that going to cause problems?..beacuse of the DMA export fiule
>  > containg
>  >  > old hostname..IP address remained the same..
>  >  >
>  >  > i'm in the middle of it so i don't have any results yet..
>  >  >
>  >  > if it would cause problems what's the soluton..
>  >  >
>  >  > i do sincerely hope it;s not the fresh install..
>  >  >
>  >  >
>  >  >
>  >  >
>  >  >
>  >  > thanx..
>  >  >
>  >  >
>  >  >
>  >  > regards..
>  >  >
>  >  >
>  >  >
>  >  >
>  >  >
>  >  > Sinisa Djokic
>  >  >
>  >  > System Engineer
>  >  >  CCNP,CCDA,CQS-CWLDS,CS-CIPTDS,CS-CIPCCES Cisco Certified
>  >  >
>  >  >
>  >  >
>  >  >
>  >  >
>  >  >
>  >  >
>  >  >
>  >  > MDS Informaticki inzenjering
>  >  >  Bul. Arsenija Carnojevica 170
>  >  >  11070 Novi Beograd, Serbia
>  >  >  Tel: +381 11 2015 200, 2015 273
>  >  >  Fax: +381 11 3194 954
>  >  >  www.mds.rs
>  >  >  sdjokic at mds.rs
>  >  >
>  >  >
>  >
>  >
>  >
>  > > _______________________________________________
>  >  >  cisco-voip mailing list
>  >  >  cisco-voip at puck.nether.net
>  >  >  https://puck.nether.net/mailman/listinfo/cisco-voip
>  >  >
>  >  >
>  >  _______________________________________________
>  >  cisco-voip mailing list
>  >  cisco-voip at puck.nether.net
>  >  https://puck.nether.net/mailman/listinfo/cisco-voip
>  >
>  >
>  >
>  >
>  >
>  >
>  > ________________________________
>  >
>  >
>  >  Disclaimer: This e-mail communication and any attachments may contain
>  > confidential and privileged information and is for use by the designated
>  > addressee(s) named above only. If you are not the intended addressee, you
>  > are hereby notified that you have received this communication in error and
>  > that any use or reproduction of this email or its contents is strictly
>  > prohibited and may be unlawful. If you have received this communication in
>  > error, please notify us immediately by replying to this message and deleting
>  > it from your computer. Thank you.
>