[cisco-voip] Hardware Failure UCM 6.11a

[Christopher M. Bomba]

Mel, you need to upgrade the firmware on your iLO 2 ports.  I have seen this
problem and that is how I fixed it. 

The firmware I applied is version 1.50

Chris

Date: Thu, 24 Apr 2008 12:58:27 -0700
From: "Melvin Fong" <mfong at pacific.edu>
Subject: [cisco-voip] Hardware Failure UCM 6.11a
To: <cisco-voip at puck.nether.net>
Message-ID:
	<FFF80CC41C32954B84FF170DAFC942FF016A81CA at EXVS1.stk.pacific.edu>
Content-Type: text/plain; charset="us-ascii"

We up graded from CM4.1.3 to UCM 6.01a in December and last month
upgraded to UCM 6.1.1a.

Every so often we get this failure:

 

At Tue Apr 22 19:57:09 PDT 2008 on node 10.52.100.3, the following
HardwareFailure events generated: hwStringMatch - hpasmxld[5949]: Failed
GET SENSOR READING, sensor 9 hwStringMatch - hpasmxld[5949]: iLO 2
Communications Error - Attempting synchronization!

 

And its not the same call manager each time, we have three in this
cluster.

Now, it has happen about 5 times since upgrading to 6.1.1a.

Thanks for any help / ideas.

 

Mel