[cisco-voip] VG224 Import with BAT in 6.1(2)

Fri Aug 1 14:25:12 EDT 2008

Yes, Just imported 400+ lines over 23 Vg224. its kinda flaky. some of the bats failed (did per gateway)

Basically, I added the gateways then used the Bat.xlt VG224 tab. you have to provide the 10 digit mac that the port will end up with as the MAC and other relivant infor.

Setup a Template for the VG224 Device.

Import

Check job

I had to remove some imports because the job got hung but beats manual input.

MAL

MAL

--- On Fri, 8/1/08, cisco-voip-request at puck.nether.net <cisco-voip-request at puck.nether.net> wrote:

> From: cisco-voip-request at puck.nether.net <cisco-voip-request at puck.nether.net>
> Subject: cisco-voip Digest, Vol 58, Issue 6
> To: cisco-voip at puck.nether.net
> Date: Friday, August 1, 2008, 12:00 PM
> Send cisco-voip mailing list submissions to
> 	cisco-voip at puck.nether.net
> 
> To subscribe or unsubscribe via the World Wide Web, visit
> 	https://puck.nether.net/mailman/listinfo/cisco-voip
> or, via email, send a message with subject or body
> 'help' to
> 	cisco-voip-request at puck.nether.net
> 
> You can reach the person managing the list at
> 	cisco-voip-owner at puck.nether.net
> 
> When replying, please edit your Subject line so it is more
> specific
> than "Re: Contents of cisco-voip digest..."
> 
> 
> Today's Topics:
> 
>    1. Re: Antw:  Cisco 7961 - Not registering (Jeff
> Cartier)
>    2. VG224 Import with BAT in 6.1(2) (Adam)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Fri, 1 Aug 2008 11:39:02 -0400
> From: "Jeff Cartier" <jcartier at acs.on.ca>
> Subject: Re: [cisco-voip] Antw:  Cisco 7961 - Not
> registering
> To: "Robert Schuknecht"
> <rschuknecht at gmx.de>,
> 	<cisco-voip at puck.nether.net>
> Message-ID:
> <BCD3E762F1767C42A5226BBACDE49BFB8AADD2 at loki.acs.local>
> Content-Type: text/plain;	charset="us-ascii"
> 
> Still looking for that .tlv file...
> 
> Jeff Cartier
> Applied Computer Solutions
> (519) 944-4300 ext. 233
> 
> -----Original Message-----
> From: Robert Schuknecht [mailto:rschuknecht at gmx.de] 
> Sent: Friday, August 01, 2008 11:35 AM
> To: cisco-voip at puck.nether.net; Jeff Cartier; Robert
> Schuknecht
> Subject: RE: Antw: [cisco-voip] Cisco 7961 - Not
> registering
> 
> AFAIK, the phone should register now.... Maybe a factory
> reset could
> help.
> 
> /Robert
> >>> Jeff Cartier<jcartier at acs.on.ca> schrieb
> am Freitag, 1. August 2008
> um 16:24 in
> Nachricht bfbc09ad136b3f1b176bac3cadf6d533:
> > Well that took some of the errors out...
> > 
> > Now I'm left with the following:
> > 
> > *Aug  1 14:22:23.524: TFTP: Looking for
> CTLSEP001F9EABEAF2.tlv
> > *Aug  1 14:22:23.664: TFTP: Looking for
> SEP001F9EABEAF2.cnf.xml
> > *Aug  1 14:22:23.664: TFTP: Opened
> system:/its/XMLDefault7961.cnf.xml,
> > fd 7, size 1106 for process 221
> > *Aug  1 14:22:23.668: TFTP: Finished
> system:/its/XMLDefault7961.cnf.xml,
> > time 00:00:00 for process 221
> > 
> > 
> > -----Original Message-----
> > From: Robert Schuknecht [mailto:rschuknecht at gmx.de] 
> > Sent: Friday, August 01, 2008 9:55 AM
> > To: cisco-voip at puck.nether.net; Jeff Cartier
> > Subject: Antw: [cisco-voip] Cisco 7961 - Not
> registering
> > 
> > Hi Jeff,
> > 
> > you have to use the alias command as described in: 
> > 
> >
> http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/
> 
> > guide/cmelocal.html#wp1083073 
> > 
> > HTH
> > 
> > /Robert 
> > 
> >>>> Jeff Cartier<jcartier at acs.on.ca>
> schrieb am Freitag, 1. August 2008
> > um 15:43 in
> > Nachricht 8cf47548cf59a2dc800e4b8cfa6d3b4f:
> > 
> >> 
> >> I'm stuck....
> >> 
> >>  
> >> 
> >> After upgrading a Cisco 7961 phone I am unable to
> get past the
> >> registering phase during the phone's boot
> sequence.  The following
> log
> >> is sourced from 'debug tftp-server
> events'.
> >> 
> >>  
> >> 
> >>  
> >> 
> >> *Aug  1 13:41:50.396: TFTP: Server request for
> port 49168, socket_id
> >> 0x4A0B0EE0 for process 221
> >> 
> >> *Aug  1 13:41:50.396: TFTP: read request from host
> > 192.168.2.106(49168)
> >> via Vlan2
> >> 
> >> *Aug  1 13:41:50.400: TFTP: Looking for
> CTLSEP001F9EABEAF2.tlv
> >> 
> >> *Aug  1 13:41:50.400: TFTP: Sending error 1 No
> such file
> >> 
> >> *Aug  1 13:41:50.536: TFTP: Server request for
> port 49169, socket_id
> >> 0x4A0B0EE0 for process 221
> >> 
> >> *Aug  1 13:41:50.536: TFTP: read request from host
> > 192.168.2.106(49169)
> >> via Vlan2
> >> 
> >> *Aug  1 13:41:50.536: TFTP: Looking for
> SEP001F9EABEAF2.cnf.xml
> >> 
> >> *Aug  1 13:41:51.432: TFTP: Opened
> system:/its/XMLDefault7961.cnf.xml,
> >> fd 7, size 1106 for process 221
> >> 
> >> *Aug  1 13:41:51.432: TFTP: Sending block 1 (retry
> 0), socket_id
> >> 0x4A0B0EE0
> >> 
> >> *Aug  1 13:41:51.436: TFTP: Received ACK for block
> 1, socket_id
> >> 0x4A0B0EE0
> >> 
> >> *Aug  1 13:41:51.436: TFTP: Sending block 2 (retry
> 0), socket_id
> >> 0x4A0B0EE0
> >> 
> >> *Aug  1 13:41:51.436: TFTP: Received ACK for block
> 2, socket_id
> >> 0x4A0B0EE0
> >> 
> >> *Aug  1 13:41:51.436: TFTP: Sending block 3 (retry
> 0), socket_id
> >> 0x4A0B0EE0
> >> 
> >> *Aug  1 13:41:51.440: TFTP: Received ACK for block
> 3, socket_id
> >> 0x4A0B0EE0
> >> 
> >> *Aug  1 13:41:51.440: TFTP: Finished
> > system:/its/XMLDefault7961.cnf.xml,
> >> time 00:00:00 for process 221
> >> 
> >> *Aug  1 13:41:52.436: TFTP: Server request for
> port 49170, socket_id
> >> 0x4A0B0EE0 for process 221
> >> 
> >> *Aug  1 13:41:52.436: TFTP: read request from host
> > 192.168.2.106(49170)
> >> via Vlan2
> >> 
> >> *Aug  1 13:41:52.436: TFTP: Looking for
> >> English_United_States/mk-sccp.jar
> >> 
> >> *Aug  1 13:41:52.436: TFTP: Sending error 1 No
> such file
> >> 
> >> *Aug  1 13:41:52.660: TFTP: Server request for
> port 49171, socket_id
> >> 0x4A0B0EE0 for process 221
> >> 
> >> *Aug  1 13:41:52.660: TFTP: read request from host
> > 192.168.2.106(49171)
> >> via Vlan2
> >> 
> >> *Aug  1 13:41:52.660: TFTP: Looking for
> United_States/g3-tones.xml
> >> 
> >> *Aug  1 13:41:52.660: TFTP: Sending error 1 No
> such file
> >> 
> >>  
> >> 
> >> I've uploaded the two files to the
> flash....g3tones.xml &
> mk-sccp.jar.
> >> But I think the problem is that the phone is
> looking for them in
> >> sub-directories...and I am unable to use the
> 'mkdir' command in the
> > IOS
> >> I'm running, which is
> c2800nm-advipservicesk9-mz.124-20.T.bin.
> >> 
> >>  
> >> 
> >> Any suggestions?
> 
> 
> ------------------------------
> 
> Message: 2
> Date: Fri, 1 Aug 2008 10:55:45 -0500
> From: Adam <cisco at adman.net>
> Subject: [cisco-voip] VG224 Import with BAT in 6.1(2)
> To: cisco-voip <cisco-voip at puck.nether.net>
> Message-ID:
> 	<c6f32ce40808010855y6c5b9c51n78f1d27ac55967a2 at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
> 
> Is it possible to import individual lines on a VG224 with
> BAT and CUCM
> 6.1(2)? I have over 200 ports across 16 VG224s that need to
>  be configured,
> but I can't work out how to make this work. If it is
> possible and  you have
> done it can you share a working CSV file?
> 
> Thanks,
> Adam
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> <https://puck.nether.net/pipermail/cisco-voip/attachments/20080801/ca0c12b9/attachment-0001.html>
> 
> ------------------------------
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 
> 
> End of cisco-voip Digest, Vol 58, Issue 6
> *****************************************