[cisco-voip] Adding a CUCM Subscriber

Sat Aug 2 19:03:36 EDT 2008

Thanks Wes, I will give it a try and let you know.

All the best

Mike

From: Wes Sisk [mailto:wsisk at cisco.com]
Sent: Saturday, 2 August 2008 1:08 PM
To: Mike Hawley (AU)
Cc: cisco-voip at puck.nether.net; jonvoip at gmail.com; Steve Parrish
Subject: Re: [cisco-voip] Adding a CUCM Subscriber

check mtu settings on pub. if MTU on pub is < default then install will silently fail.

other causes: subscriber name or IP has already been used.

Unified Reporting Tool from the web page will show existing hosts, .rhosts, and sqlhosts entries allowing you to check for inconsistencies.

otherwise the certificate exchange between pub/sub is in plain text/xml in a packet capture so you can watch the conversation and identify problem.

clustermanager logs on the publisher may also be helpful.

/Wes

Mike Hawley (AU) wrote:

Hi Jon,

6.1.2 - yes 8 node licenses ,  it does join the local cluster if on the local subnet ok, only when it is on different subnet.

We are not using DNS at this stage, relying on CUCM to create host files for name resolution. It is possible to ping the ip address of the new sub from the pub. But it is unable to join the cluster. No firewalls etc between subnets.

Was thinking of setting up DNS and trying it again.

Thanks

________________________________

From: Jonathan Charles [mailto:jonvoip at gmail.com]

Sent: Sat 2/08/2008 12:58 a.m.

To: Mike Hawley (AU)

Cc: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>; Steve Parrish

Subject: Re: [cisco-voip] Adding a CUCM Subscriber

Do you have node and feature licenses loaded on the Publisher? Are the

services started (not just activated)... what version of CCM? I am

guessing 6.X...

Jonathan

On Fri, Aug 1, 2008 at 3:57 AM, Mike Hawley (AU)

<Mike.Hawley at didata.com.au><mailto:Mike.Hawley at didata.com.au> wrote:

Hi, I have an issue when I am trying to add a Subscriber server to a new

Publisher.  They are in different subnets (10.111.128.x, and 10.111.144.x)

but within the same lab setup.

What happens is the first Subscriber server fails to add itself to the new

database, and gives me an error of "Configuration validation with ANBAK2-C1

(10.111.128.10) failed"

We get asked if it is the first node and we say no, but we still get the

following message; "Configured 1st node ANBAK2-C1 is not a 1st node "

I have done the following so far;

1.    Setup SUB as a new server in database

2.    Started all the CUCM services on Pub

We moved the sub server to the same subnet, which works successfully.  I

cannot leave it like this as my customer wants the servers in different

geographic locations.

Any help appreciated...

Mike

******************************************************************************

- NOTICE FROM DIMENSION DATA AUSTRALIA

This message is confidential, and may contain proprietary or legally

privileged information. If you have received this email in error, please

notify the sender and delete it immediately.

Internet communications are not secure. You should scan this message and any

attachments for viruses. Under no circumstances do we accept liability for

any loss or damage which may result from your receipt of this message or any

attachments.

******************************************************************************

_______________________________________________

cisco-voip mailing list

cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>

https://puck.nether.net/mailman/listinfo/cisco-voip

This communication, including any attachments, is confidential. If you are not the intended recipient, you should not read it - please contact me immediately, destroy it, and do not copy or use any part of this communication or disclose anything about it. Thank you. Please note that this communication does not designate an information system for the purposes of the Electronic Transactions Act 2002.

_______________________________________________

cisco-voip mailing list

cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>

https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080803/018e08fb/attachment-0001.html>