[cisco-voip] UCCx 5.0 scripts
Jonathan Charles
jonvoip at gmail.com
Mon Aug 4 16:27:58 EDT 2008
JTAPI in service?
Stop and start the engine...
Failing all of that, post your MIVR log.
Jonathan
On Mon, Aug 4, 2008 at 3:19 PM, Scott Voll <svoll.voip at gmail.com> wrote:
> yep and the CTI ports are registered
>
> Prompts are in there.
>
> Scott
>
> On Mon, Aug 4, 2008 at 12:57 PM, Jonathan Charles <jonvoip at gmail.com>wrote:
>
>> Do you have a call control group and a primary dialog group selected?
>>
>>
>> Jonathan
>>
>> On Mon, Aug 4, 2008 at 2:08 PM, Scott Voll <svoll.voip at gmail.com> wrote:
>>
>>> i'm upgrading from uccx 4.0 and have downloaded the scripts from the
>>> 4.x server. I then brought it up on the new 5.0 server editor and saved
>>> it. Iit doesn't seem to do anything (but it does save). I then install it
>>> as an application on the 5.0 server but it dials the RP transfers to the CTI
>>> Port and goes to a fast busy. I assume it's the script. Any ideas of how
>>> to get the old scripts working? I don't want to spend the time on
>>> rescripting mulitple Scripts if I don't have to.
>>>
>>> any ideas?
>>>
>>> tia
>>>
>>> scott
>>>
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080804/c9fc0c74/attachment.html>
More information about the cisco-voip
mailing list