[cisco-voip] UCCx 5.0 scripts

[Scott Voll]

yep and the CTI ports are registered

Prompts are in there.

Scott

On Mon, Aug 4, 2008 at 12:57 PM, Jonathan Charles <jonvoip at gmail.com> wrote:

> Do you have a call control group and a primary dialog group selected?
>
>
> Jonathan
>
>  On Mon, Aug 4, 2008 at 2:08 PM, Scott Voll <svoll.voip at gmail.com> wrote:
>
>>   i'm upgrading from uccx 4.0 and have downloaded the scripts from the
>> 4.x server.  I then brought it up on the new 5.0 server editor and saved
>> it.  Iit doesn't seem to do anything (but it does save). I then install it
>> as an application on the 5.0 server but it dials the RP transfers to the CTI
>> Port and goes to a fast busy.  I assume it's the script.  Any ideas of how
>> to get the old scripts working?  I don't want to spend the time on
>> rescripting mulitple Scripts if I don't have to.
>>
>> any ideas?
>>
>> tia
>>
>> scott
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080804/1d741ff7/attachment.html>