[cisco-voip] UCCx 5.0 scripts
Jonathan Charles
jonvoip at gmail.com
Mon Aug 4 15:57:08 EDT 2008
Do you have a call control group and a primary dialog group selected?
Jonathan
On Mon, Aug 4, 2008 at 2:08 PM, Scott Voll <svoll.voip at gmail.com> wrote:
> i'm upgrading from uccx 4.0 and have downloaded the scripts from the 4.x
> server. I then brought it up on the new 5.0 server editor and saved
> it. Iit doesn't seem to do anything (but it does save). I then install it
> as an application on the 5.0 server but it dials the RP transfers to the CTI
> Port and goes to a fast busy. I assume it's the script. Any ideas of how
> to get the old scripts working? I don't want to spend the time on
> rescripting mulitple Scripts if I don't have to.
>
> any ideas?
>
> tia
>
> scott
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080804/a1e477b6/attachment.html>
More information about the cisco-voip
mailing list