[cisco-voip] Alerting Name being passed to PBX

William Roy William.Roy at l7.com.au
Wed Aug 6 04:23:07 EDT 2008


No we do not get connected name once the call is connected only calling number. This is a debug from an IP phone to a NEC phone


ho-vgate-1#
ho-vgate-1#
*Aug  6 08:21:39.106: ISDN Se0/0/0:15 Q931: TX -> SETUP pd = 8  callref = 0x001E
        Sending Complete
        Bearer Capability i = 0x8090A3
                Standard = CCITT
                Transfer Capability = Speech
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0xA9839F
                Exclusive, Channel 31
        Calling Party Number i = 0x0081, '6005'
                Plan:Unknown, Type:Unknown
        Called Party Number i = 0x80, '4723'
                Plan:Unknown, Type:Unknown
*Aug  6 08:21:39.166: ISDN Se0/0/0:15 Q931: RX <- CALL_PROC pd = 8  callref = 0x801E
        Channel ID i = 0xA9839F
                Exclusive, Channel 31
*Aug  6 08:21:39.170: ISDN Se0/0/0:15 Q931: RX <- ALERTING pd = 8  callref = 0x801E
*Aug  6 08:21:43.158: ISDN Se0/0/0:15 Q931: RX <- CONNECT pd = 8  callref = 0x801E
        Progress Ind i = 0x8082 - Destination address is non-ISDN
        Connected Number i = 0x0081, '4723'
*Aug  6 08:21:43.162: ISDN Se0/0/0:15 Q931: TX -> CONNECT_ACK pd = 8  callref = 0x001E
________________________________
From: smithsonianwa at gmail.com [smithsonianwa at gmail.com] On Behalf Of Tim Smith [thsglobal at gmail.com]
Sent: Wednesday, 6 August 2008 3:54 PM
To: William Roy
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Alerting Name being passed to PBX

Hi Wil,

What do you see with a debug isdn q931?

Do you get connected name once the call is established?

Cheers,

Tim.





On 8/6/08, William Roy <William.Roy at l7.com.au<mailto:William.Roy at l7.com.au>> wrote:
I have NEC IPX2400 PBX connected to a ISR2851 via an QSIG E1 link. The ISR is setup as an MGCP gateway with a CUCM 6.1 cluster. I am not seeing Calling name being passed either from an NEC phone to a Cisco IP phone or visa versa. Is there any debug I can run on the ISR to see if the cisco ip phone is sending Calling name?

regards
Wil

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080806/59fa8041/attachment-0001.html>


More information about the cisco-voip mailing list