[cisco-voip] Multiparty conference with VT advantage

[Philip Walenta]

Continuous presence and SCCP are mututally exclusive.
 
If SCCP is being used, CP cannot be used on the MCU.
 
However it is likely that you are running into view setting problems.

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Aman Chugh
Sent: Wednesday, August 06, 2008 9:37 AM
To: Bill Talley
Cc: cisco voip
Subject: Re: [cisco-voip] Multiparty conference with VT advantage


I will check for it and revert.
 
Thanks ,
 
Aman

 
On 8/6/08, Bill Talley <billt at aos5.com> wrote: 

Sound like you don't have the continous presence conference layout set
appropriately on the mcu.  If you want to see all three participants at the
same time, you need to configure the view to show three or more parties.
Otherwise it will only show the current speaker and the previous speaker in
the video displays.

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Aman Chugh
Sent: Wednesday, August 06, 2008 8:27 AM
To: cisco voip
Subject: [cisco-voip] Multiparty conference with VT advantage

 

 
Hi,
 
I have configured MCU 3515 as a sccp VCB bridge in CCM and I have three
clients , lets say A, B and C with VT advantage , I am trying a video
conference with all three and getting inconsistent results . A is able to
see B and A. B is able to see A and B .C is able to see A and B but not C.
What should be the default and consistent behaviour.
 
CCM - 4.1.3 sr7
MCU - 5.5
 
TIA
 
 
Aman
CONFIDENTIALITY NOTICE: This electronic mail transmission (including any
accompanying attachments) is intended solely for its authorized
recipient(s), and may contain confidential and/or legally privileged
information. If you are not an intended recipient, or responsible for
delivering some or all of this transmission to an intended recipient, be
aware that any review, copying, printing, distribution, use or disclosure of
the contents of this message is strictly prohibited. If you have received
this electronic mail message in error, please delete it from your system
without copying it, and contact sender immediately by Reply e-mail, or by
calling 913-307-2300, so that our address records can be corrected.



Although this e-mail and any attachments are believed to be free of any
virus or other defect that might negatively affect any computer system into
which it is received and opened, it is the responsibility of the recipient
to ensure that it is virus free and no responsibility is accepted by the
sender for any loss or damage arising in any way in the event that such a
virus or defect exists.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080806/87ec1733/attachment.html>