[cisco-voip] Multiparty conference with VT advantage

[Aman Chugh]

What is default  behaviour in a three party video conference using MCU with
VT advantage. According to this document it is 1+7 for the sccp service , I
am not sure what 1+7 means.

http://www.cisco.com/en/US/docs/video/cuvc/release_5_1/mcu/3515/administration/guide/Services.html#wp1687746

Thanks,

Aman


On 8/6/08, Philip Walenta <pwalenta at wi.rr.com> wrote:
>
>  Continuous presence and SCCP are mututally exclusive.
>
> If SCCP is being used, CP cannot be used on the MCU.
>
> However it is likely that you are running into view setting problems.
>
>
>  ------------------------------
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Aman Chugh
> *Sent:* Wednesday, August 06, 2008 9:37 AM
> *To:* Bill Talley
> *Cc:* cisco voip
> *Subject:* Re: [cisco-voip] Multiparty conference with VT advantage
>
>
>  I will check for it and revert.
>
> Thanks ,
>
> Aman
>
>
> On 8/6/08, Bill Talley <billt at aos5.com> wrote:
>>
>>  Sound like you don't have the continous presence conference layout set
>> appropriately on the mcu.  If you want to see all three participants at the
>> same time, you need to configure the view to show three or more parties.
>> Otherwise it will only show the current speaker and the previous speaker in
>> the video displays.
>>
>>  ------------------------------
>> *From:* cisco-voip-bounces at puck.nether.net [mailto:
>> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Aman Chugh
>> *Sent:* Wednesday, August 06, 2008 8:27 AM
>> *To:* cisco voip
>> *Subject:* [cisco-voip] Multiparty conference with VT advantage
>>
>>
>>
>> Hi,
>>
>> I have configured MCU 3515 as a sccp VCB bridge in CCM and I have three
>> clients , lets say A, B and C with VT advantage , I am trying a
>> video conference with all three and getting inconsistent results . A is able
>> to see B and A. B is able to see A and B .C is able to see A and B but not
>> C. What should be the default and consistent behaviour.
>>
>> CCM - 4.1.3 sr7
>> MCU - 5.5
>>
>> TIA
>>
>>
>> Aman
>>
>> CONFIDENTIALITY NOTICE: This electronic mail transmission (including any accompanying attachments) is intended solely for its authorized recipient(s), and may contain confidential and/or legally privileged information. If you are not an intended recipient, or responsible for delivering some or all of this transmission to an intended recipient, be aware that any review, copying, printing, distribution, use or disclosure of the contents of this message is strictly prohibited. If you have received this electronic mail message in error, please delete it from your system without copying it, and contact sender immediately by Reply e-mail, or by calling 913-307-2300, so that our address records can be corrected.
>>
>> Although this e-mail and any attachments are believed to be free of any virus or other defect that might negatively affect any computer system into which it is received and opened, it is the responsibility of the recipient to ensure that it is virus free and no responsibility is accepted by the sender for any loss or damage arising in any way in the event that such a virus or defect exists.
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080806/ef5185f6/attachment.html>