[cisco-voip] 7931

[Lelio Fulgenzi]

conflicting Cisco documentation? never.

even when you find confirming Cisco documentation, you can't bet a beer on it.

we read the documentation on some of the LWAPP APs which said they used Cisco Inline Power, budgeted a project based on that and then found out they were not compatible. "oh , sorry, that was a documentation error." we had to buy new switches in a few locations. not cheap.

unless you see it working in front of your eyes, don't bet the farm on it.

/rant off.

Lelio
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
...seen on a Geek Squad patch cord: "While it is the same length, this 7' crossover cable
is not regulation issue for most competitive Manhattan double dutch leagues.
  ----- Original Message ----- 
  From: Sarah Skillings 
  To: cisco-voip at puck.nether.net 
  Sent: Wednesday, August 06, 2008 6:34 PM
  Subject: [cisco-voip] 7931


  Does any one know if the 7931 is supported in 4.2(3) version of Call Manager?  I'm getting conflicting information from Cisco website.  The compatibility chart says it is, but when I look up the firmware for the 7931 I don't show a firmware version that is compatible with the 4.2(3) version of CCM.

  Thanks


------------------------------------------------------------------------------
  Reveal your inner athlete and share it with friends on Windows Live. Share now! 


------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080806/0f800e1f/attachment.html>