[cisco-voip] Marking voicemail as private.
Yujin Tan
Yujin.Tan at l7.com.au
Thu Aug 7 01:17:14 EDT 2008
Philip,
Thanks for the info. Any hint on where the settings are located? so far the only options that I have seen are under features > enable encryption and features > set priority, nothing that points to enabling caller to leaving voicemail as private.
________________________________________
From: Philip Walenta [pwalenta at wi.rr.com]
Sent: Wednesday, 6 August 2008 7:32 PM
To: Yujin Tan; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Marking voicemail as private.
You can mark messages as private. I believe you need to allow the caller to
end the recording then set the option after the message was recorded. There
are some checkboxes that control this on a per user or per group basis.
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Yujin Tan
Sent: Wednesday, August 06, 2008 2:02 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Marking voicemail as private.
Hi,
Is there an options on unity where you can mark a voice mail as private when
you leave a message (just like when you mark priority)?? Seems you can only
do that when you dial unity and choose send message.
Regards
YuJin
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
More information about the cisco-voip
mailing list