[cisco-voip] Question about moving unity users between servers

[Beck, Christopher]

I have been working on a procedure to move users from one unity server
to another.  I am planning to use GSM to do this, but have hit a snag.

 

The first unity server only supports a single pbx integration.  The
second Unity server supports 4 pbx integrations.  When I move the user,
GSM works great but doesn't let me specify which pbx integration to
assign to the user.  

 

I began investigating the various tools on the tools depot.  Bulk
subscriber edit will do this, with the restriction that you must be
running Unity versions prior to 4.2.1.  Since the target server is
running 4.2.1, I am left with the telephony Integration manager.  The
issue there is that there isn't a way to select via CSV.  It seems you
can do multiple users, but you have to select from the grid.

 

So, does anyone know a tool that I can use to automate the pbx
selection?  It would be awesome to do the move in one step (with the
tool performing all changes), but I will be happy to perform it in
multiple steps.

 

Any help is greatly appreciated.

 

-Chris

 

Chris Beck

IT Lead - Voice Technologies

USG Corporation

cbeck at usg.com

 



Confidentiality Notice: This email is intended for the sole use of the intended recipient(s) and may contain confidential, proprietary or privileged information. If you are not the intended recipient, you are notified that any use, review, dissemination, copying or action taken based on this message or its attachments, if any, is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy or delete all copies of the original message and any attachments. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080807/fbb88034/attachment.html>