[cisco-voip] Attendant Console press dialpad and Intercom line goesoffhook

[James Buchanan]

It can and does. You cannot use AC with Intercom.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Aarons
(US)
Sent: Thursday, August 07, 2008 2:52 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Attendant Console press dialpad and Intercom line
goesoffhook

 

I have new Callmanager 6.1.2 setup and tested Intercom Partitions and
Intercom feature in general. No issues dialing between phones or using
Intercom.

 

I then added Attendant Console, call control initialized, I press the
dialpad button in Attendant Console and to my surprise the Intercom line
went offhook on line 6 instead of line 1.

 

My phone directory numbers and Intercom DNs are the same.  

 

I don't see or ever recall in AC having to tell it a partition of the
line to control, but I assumed it couldn't look in Intercom
Partition...much less control the Intercom line..

 

Phone 7931

Line 1 = 182 = Intercom_PT

Line 6 = 182 = Internal_PT

  

________________________________

Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee,
you are hereby notified that you have received this communication in
error and that any use or reproduction of this email or its contents is
strictly prohibited and may be unlawful. If you have received this
communication in error, please notify us immediately by replying to this
message and deleting it from your computer. Thank you. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080807/a8b1f317/attachment-0001.html>