[cisco-voip] H323 Tone on Hold

[STEVEN CASPER]

I do not want music on hold or tone on hold, just sweet silence!
 
Steve

>>> "Beck, Christopher" <CBeck at usg.com> 8/11/2008 9:29 AM >>>

Did you put the ccm-manager music-on-hold command in the config?  That is still required.
 

Chris Beck
IT Lead - Voice Technologies
USG Corporation
cbeck at usg.com

 

From:cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of STEVEN CASPER
Sent: Monday, August 11, 2008 8:26 AM
To: cisco-voip at puck.nether.net 
Subject: [cisco-voip] H323 Tone on Hold

 

I have some H323 locations and have discovered that
callers are getting "tone on hold" when placed on hold at the site  Not happening on MGCP sites and on internal calls. Anyone have any idea how can I get rid of this at H323 sites?

 

CUCM 6.1.1b IOS 12.4.12a

 

Thanks!

Steve
************************************This email may contain privileged and/or confidential information that is intended solely for the use of the addressee.  If you are not the intended recipient or entity, you are strictly prohibited from disclosing, copying, distributing or using any of the information contained in the transmission.  If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.  This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act and the Sarbanes-Oxley Act.  You may not directly or indirectly reuse or disclose such information for any purpose other than to provide the services for which you are receiving the information.There are risks associated with the use of electronic transmission.  The sender of this information does not control the method of transmittal or service providers and assumes no duty or obligation for the security, receipt, or third party interception of this transmission.************************************

Confidentiality Notice: This email is intended for the sole use of the intended recipient(s) and may contain confidential, proprietary or privileged information. If you are not the intended recipient, you are notified that any use, review, dissemination, copying or action taken based on this message or its attachments, if any, is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy or delete all copies of the original message and any attachments. Thank you.

************************************
This email may contain privileged and/or confidential information that is intended solely for the use of the addressee.  If you are not the intended recipient or entity, you are strictly prohibited from disclosing, copying, distributing or using any of the information contained in the transmission.  If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.  This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act and the Sarbanes-Oxley Act.  You may not directly or indirectly reuse or disclose such information for any purpose other than to provide the services for which you are receiving the information.
There are risks associated with the use of electronic transmission.  The sender of this information does not control the method of transmittal or service providers and assumes no duty or obligation for the security, receipt, or third party interception of this transmission.
************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080811/ebd76356/attachment.html>