[cisco-voip] * with Park and slow "Call Parked at XX"

[Mark J]

Try *7X which allows 0-9 call parks.



2008/8/12 Jason Aarons (US) <jason.aarons at us.didata.com>

>  Callmanager 6.1.2-1000-13 I can't dial *71 from 7931 8.3.4SR1S SCCP with
> range set to found *7[1-5].  If I change park to 7[1-5] no issues.
>
>
>
> Also the Call Park Display is very slow to display on the 7931 handset.
> Takes 4-5 seconds to show "Call Parked at 71".  I recall this is known
> defect but need the bug id.
>
>
>
>
>
>
>
> ------------------------------
>
> * Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you. *
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080812/4b4faa77/attachment.html>