[cisco-voip] fxo outgoing calls per group?

[Joe Cisco]

You should be able to do it with COR. I had a client that had a PRI
and then a Telular SX5. Everyone was allowed to use the PRI, only
certain users could use the Telular device. I created a COR class that
restricted use to the Telular that was applied to the DNs.

-Joe C.

On Tue, Aug 12, 2008 at 6:10 PM, Dan Letkeman <danletkeman at gmail.com> wrote:
> Hello,
>
> I have a 2821 router with CME 4.3 setup in a building where there are
> two groups of users;  Group one has 5 analog lines and group two has 2
> analog lines.  The problem is when either group of users makes a call,
> it picks a random line from the 7 lines and places the call.  I would
> like for it to use the same group of lines for incoming and outgoing
> calls.  Is there a way to force it to go out certain lines?
>
> Thanks,
> Dan.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>