[cisco-voip] fxo outgoing calls per group?
Dan Letkeman
danletkeman at gmail.com
Tue Aug 12 20:47:09 EDT 2008
Great. I'll test it out.
Thanks,
Dan.
On Tue, Aug 12, 2008 at 6:57 PM, Joe Cisco <smetsysocsic at gmail.com> wrote:
> You should be able to do it with COR. I had a client that had a PRI
> and then a Telular SX5. Everyone was allowed to use the PRI, only
> certain users could use the Telular device. I created a COR class that
> restricted use to the Telular that was applied to the DNs.
>
> -Joe C.
>
> On Tue, Aug 12, 2008 at 6:10 PM, Dan Letkeman <danletkeman at gmail.com> wrote:
>> Hello,
>>
>> I have a 2821 router with CME 4.3 setup in a building where there are
>> two groups of users; Group one has 5 analog lines and group two has 2
>> analog lines. The problem is when either group of users makes a call,
>> it picks a random line from the 7 lines and places the call. I would
>> like for it to use the same group of lines for incoming and outgoing
>> calls. Is there a way to force it to go out certain lines?
>>
>> Thanks,
>> Dan.
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>
More information about the cisco-voip
mailing list