[cisco-voip] fxo outgoing calls per group?
Paul
asobihoudai at yahoo.com
Tue Aug 12 20:54:33 EDT 2008
You could have each group use a different code before dialing. Have one group use 8 before their number and the other use 9. You then assign each set of users a trunk group which will ensure that only those lines will be used for outbound calls.
Paul
----- Original Message ----
From: Dan Letkeman <danletkeman at gmail.com>
To: cisco-voip at puck.nether.net
Sent: Tuesday, August 12, 2008 4:10:55 PM
Subject: [cisco-voip] fxo outgoing calls per group?
Hello,
I have a 2821 router with CME 4.3 setup in a building where there are
two groups of users; Group one has 5 analog lines and group two has 2
analog lines. The problem is when either group of users makes a call,
it picks a random line from the 7 lines and places the call. I would
like for it to use the same group of lines for incoming and outgoing
calls. Is there a way to force it to go out certain lines?
Thanks,
Dan.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
More information about the cisco-voip
mailing list