[cisco-voip] Alerting Name being passed to PBX

[Tim Smith]

Hi Will,

Did you end up getting a result on this one?

Cheers,

Tim.



>    On 8/6/08, William Roy <William.Roy at l7.com.au> wrote:
>>
>>>  I have NEC IPX2400 PBX connected to a ISR2851 via an QSIG E1 link. The
>>> ISR is setup as an MGCP gateway with a CUCM 6.1 cluster. I am not seeing
>>> Calling name being passed either from an NEC phone to a Cisco IP phone or
>>> visa versa. Is there any debug I can run on the ISR to see if the cisco ip
>>> phone is sending Calling name?
>>>
>>> regards
>>> Wil
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>
>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080813/b11452b3/attachment.html>