[cisco-voip] SRST config

[Lelio Fulgenzi]

Did you follow the steps outlined in this document?

http://www.cisco.com/en/US/docs/voice_ip_comm/cusrst/admin/srst/configuration/guide/srstsa.html

This should give you everything you need.

Did the phones work properly before SRST? The phones need to have downloaded 
their config from the TFTP server at least once in order to upload it to the 
SRST box.

--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"Bad grammar makes me [sic]" - Tshirt

----- Original Message ----- 
From: "cisco.voip" <cisco.voip at verizon.net>
To: <cisco-voip at puck.nether.net>
Sent: Wednesday, August 13, 2008 1:20 AM
Subject: [cisco-voip] SRST config


>I am configuring up SRST in the lab, and I get the Phone to registr 
>correctly and the phones show 'CM Fallback Operation:
> However, I get no line buttons on the phone?  CCM 4.1 - IOS 12.4T 2691.
>
> Thanks.
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>