[cisco-voip] FXO Incoming Call disconnection

[SR IRWMA]

Hi,

I configured 2801 router as gateway through mgcp with CCM 4.2(3). Gateway
has FXO modules with analog lines. Outgoing calls are fine but when someone
from out side dial inside and phone inside start ringing. If caller
disconnect call but phone will keep ringing. I know this is because of loop
start but tell me how to solve this problem.

Best Regards
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080813/6d4c8659/attachment.html>