[cisco-voip] Unity Connection with the Phone View feature

Wed Aug 13 13:06:18 EDT 2008

Did you check the "URL authentication" under Enterprise Parameters in
CUCM 6?

It should be set to:

http://<CallManager_IP_Address>:8080/ccmcip/authenticate.jsp
<http://%3cCallManager_IP_Address%3e:8080/ccmcip/authenticate.jsp> 

-Sebastien

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mike Hawley
(AU)
Sent: Tuesday, August 12, 2008 10:33 PM
To: Pat Hayes
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Unity Connection with the Phone View feature

Hi Guys, I have got to the stage of installing the Unity Connection and
enabled Phone View, but when I press key 5, and then 4 to display the
message I get an error indication of "there was an error displaying your
message see the administrator".  I have a 7962 IP phone, I have all the
users created and associated devices to the Application user, CTI
Manager is working fine but it is not working.

If anyone knows what report I should be looking at within RTMT that
would be a start...

I am running CUCM 6.1.2, and Unity Connection 2.1.2.1000-380.

Any ideas would be appreciated.

All the best

Mike Hawley

From: pat at wcyv.com [mailto:pat at wcyv.com] On Behalf Of Pat Hayes
Sent: Wednesday, 30 July 2008 11:49 PM
To: Mike Hawley (AU)
Cc: Wilusz, Mike; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Unity Connection with the Phone View feature

PhoneView refers to a few different features, including message locater
and message monitor which one are you trying to get to work? It sounds
like message monitor, which according to this feature comparison, is in
Unity only at the moment, not UC:

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6789/ps5745/ps2237/
product_data_sheet0900aecd806bfc37_ps6509_Products_Data_Sheet.html

UC does have message locater, though, but that comes in to play when
browsing your messages while signed in.

On Wed, Jul 30, 2008 at 1:09 AM, Mike Hawley (AU)
<Mike.Hawley at didata.com.au> wrote:

Hi, did you guys resolve this as I am not seeing the phoneview prompt on
my phone when call gets delivered to VM.  I am using 7962G which is the
newer release of 7961G so it should work, even thought not listed...?

I have followed all the recommendations set below and it still does not
work...

One other thing - do you know if it works for Extension Mobility users?

All the best

Mike

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Wilusz, Mike
Sent: Monday, 19 May 2008 2:21 AM
To: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Unity Connection with the Phone View feature

Dave,

I have a very similar install running (same versions).  I have it
working on 7961Gs as well.  Make sure that you have the "PhoneView"
application user set up on the Communications Manager and that the
credentials match between CUCM and Unity Connection.  If these match,
you also have to make sure that the "PhoneView" user on CUCM has all the
required handsets set as Controlled Devices.  Besides that, the only
other setup is on Unity Connection, where under each user you have to
enable Phone View (or set it up under the CoS).  On a per-user basis,
you set this up under the user -> Edit -> Phone Menu.  You should see an
option to Enable Phone View.

When I had the same issue as you it was because I had not set the phones
as controlled devices under my "PhoneView" application user on CUCM.
But, any of the above may cause this.  

Hope this helps!

Mike Wilusz, CCNA

Networking Systems Programmer

Price Chopper Supermarkets / The Golub Corporation

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of dschulz
Sent: Sunday, May 18, 2008 9:07 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Unity Connection with the Phone View feature

Hi Group - 

Has anyone had success to get Phone View to work with Unity Connection?
I am using UC version 2.0(1) with CallManager 6.1.  Everything appears
to work up to the point where it states, "Searching......there was a
problem displaying messages on your phone, please contact your system
administrator".  I am using a 7961G, which the documentation states that
this is a supported phone.  Is there a special load needed?  Any help is
appreciated.

Dave 

************************************************************************
******

- NOTICE FROM DIMENSION DATA AUSTRALIA

This message is confidential, and may contain proprietary or legally
privileged information. If you have received this email in error, please
notify the sender and delete it immediately.

Internet communications are not secure. You should scan this message and
any attachments for viruses. Under no circumstances do we accept
liability for any loss or damage which may result from your receipt of
this message or any attachments.

************************************************************************
******

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080813/ff7275af/attachment-0001.html>