[cisco-voip] 7937 on CME

[Alfred Thyri]

Hi guys,

tried it - and it works :)
only drawback so far is a delay of about 40 seconds using the TSP tool for
dialing from MS Outlook.

Alfred.

On Thu, Jul 31, 2008 at 3:08 PM, Alfred Thyri <alfred.thyri at gmail.com>wrote:

> Hi Ryan,
>
> Do you know if this procedure works on a UC520, too?
>
> Alfred.
>
>
> On Tue, Jul 15, 2008 at 2:44 PM, Ryan West <rwest at zyedge.com> wrote:
>
>> Christopher,
>>
>> You can also run 12.4(15)XZ, which is a BU (Business Unit) release under
>> the 12.4(15)T train.  That being said, I would trust the releases under the
>> T train more than the BU's.  Most likely there are no substantial changes
>> between 12.4(20)T and 12.4(15)XZ concerning the operation of CME.  However,
>> the regression testing performed on the T train is much longer and involved
>> than that of the BU's.  The BU's are allowed to brought to market much
>> quicker features sake.  However, after checking out the open caveats between
>> releases, you might be better off going with 12.4(15)XZ1.
>>
>> To answer your original question though, 12.4(15)XZ is the oldest code you
>> can run it on.  There are a lot of useful features that were introduced in
>> 7.0/4.3, octo lines, xfer to voicemail, and some hunt group changes.
>>
>> Here is the relevant information you'll need to get the 7937 working in
>> CME 4.3/7.0:
>>
>> tftp-server flash:phone/7937/apps37sccp.1-1-1-1.bin alias
>> apps37sccp.1-1-1-1.bin
>>
>> telephony-service
>> load 7937 apps37sccp.1-1-1-1
>>
>> ephone-type 7937
>> device-id 431
>> device-name Cisco 7937 Conference
>> num-buttons 1
>> max-presentation 1
>>
>>
>> ephone 20
>> device-security-mode none
>> mac-address xxxx.xxxx.xxxx
>> type 7937
>> button 1:23
>>
>> You'll also need to do a factory reset using **1.
>>
>> -ryan
>>
>> -----Original Message-----
>> From: cisco-voip-bounces at puck.nether.net [mailto:
>> cisco-voip-bounces at puck.nether.net] On Behalf Of Christopher M. Bomba
>> Sent: Tuesday, July 15, 2008 7:45 AM
>> To: cisco-voip at puck.nether.net
>> Subject: [cisco-voip] 7937 on CME
>>
>> While looking over the compatibility matrix, I noticed that no code
>> earlier than 7.0/4.3 supports the 7937.  That seems pretty extreme as the
>> document also says that you need to upgrade the IOS to 12.4(20)T to support
>> this release.  That code was only released on July 11th.
>>
>> Does anyone have a 7937 running in CME on an older code?  I was looking
>> more along the lines of CME 4.1 or even older.
>>
>> Thanks,
>>
>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> Christopher Bomba   CCNP, CCVP
>> solutions4networks
>> Email - chris at s4nets.com
>> Cell - 412.398.3990
>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080813/4467dbe2/attachment.html>