[cisco-voip] PVDM2 and PVDM question.

[Jonathan Charles]

Big enough that they are entered into CCM differently (Cisco IOS Conference
Bridge or Cisco IOS Enhanced Conference Bridge, with the latter being for a
PVDM2).



Jonathan

On Thu, Aug 14, 2008 at 10:26 AM, David Lima <David.Lima at alphasys.com.bo>wrote:

>  Hi friends, I have a question about resources. I had a CCM 3.3(4)sr2 with
> a Cisco 2620XM with PVDM functioning as conferencing and transcoding
> resources. It was working fine and when I migrate the version to a CCM
> 4.1(3)sr7 I couldn't establish a conference between ip phones and
> cell-phones. But when I change the PVDM for PVDM2 (Cisco 2801), the
> conference works again.
>
> Somebody had a similar problem? Is there a big difference between PVDM and
> PVDM2? The upgrade can be causing this?
>
> Thanks a lot dear friends
>
> David.
>
> .
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080814/5201adc0/attachment.html>