[cisco-voip] call translation patterns

[Matthew Loraditch]

All,
I've inherited a system where all of the translation was done at the voice routers instead of in CCM. I'm not a big fan of that and would like to move all my patterns to the server.
Below is the current config on one of the dial peers, what do I need to do to remove translation from the router? I know it has to do with changing the destination pattern, but I'm not sure if ijust remove the line or change it somehow.


dial-peer voice 100 voip
 tone ringback alert-no-PI
 description FOR INBOUND 443-xxx-xxxx Calls to CCMP
 preference 1
 destination-pattern 4431234...
 progress_ind setup enable 3
 progress_ind progress enable 8
 progress_ind connect enable 8
 voice-class codec 1
 voice-class h323 1
 session target ipv4:XX.XX.XX.XX
 incoming called-number .
 dtmf-relay rtp-nte h245-signal h245-alphanumeric
 no vad

Thanks for the help!

Matthew Loraditch
10944 Beaver Dam Road, Suite A
Hunt Valley, Maryland  21030
support at heliontechnologies.com<mailto:support at heliontechnologies.com>
(p) (410) 252-8830
(F) (443) 541-1593

Visit us at www.heliontechnologies.com<http://www.heliontechnologies.com>
Support Issue? Email support at heliontechnologies.com<mailto:support at heliontechnologies.com> for fast assistance!

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080818/cd5d800c/attachment-0001.html>