[cisco-voip] sample value for international deployments inter-digit timeout T.302

[Jason Aarons (US)]

Any have recommended value for the T302 inter-digit timeout in
Callmanager? I reduced from default 180000ms to 90000ms but they say
it's still to long. Thinking about 60000ms....I already have a Route
Pattern with # at end but they don't seem to want to remember to use it!

 

I assume a restart of services is not required when changing T302...

 

International Dial Plans

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/idp/v4/deploy/dpdep42
1.html

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080819/a99471dd/attachment.html>