[cisco-voip] sample value for international deployments inter-digit timeout T.302

[Tim Smith]

Yeah 18 seconds is slightly extreme :)

6 is a good one...
4 was the lowest I went (had to go this low because there was normal
national route patterns that used the !)

Last time I changed this on CCM 4.1 I'm pretty sure you needed a callmanager
service restart. Not sure on 5 and 6..

May depend on how old the users are :)

Cheers,

Tim


On 8/19/08, Jason Aarons (US) <jason.aarons at us.didata.com> wrote:
>
>  Any have recommended value for the T302 inter-digit timeout in
> Callmanager? I reduced from default 180000ms to 90000ms but they say it's
> still to long. Thinking about 60000ms….I already have a Route Pattern with #
> at end but they don't seem to want to remember to use it!
>
>
>
> I assume a restart of services is not required when changing T302…
>
>
>
> International Dial Plans
>
>
> http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/idp/v4/deploy/dpdep421.html
>
>
>
> ------------------------------
>
> *Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you. *
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080819/0e288267/attachment-0001.html>