[cisco-voip] sample value for international deployments inter-digit timeout T.302

[Matthew Saskin]

I tend to use 5 seconds across the board and have not had complaints 
from anyone.

-matt

Jason Aarons (US) wrote:
> Any have recommended value for the T302 inter-digit timeout in 
> Callmanager? I reduced from default 180000ms to 90000ms but they say 
> it’s still to long. Thinking about 60000ms….I already have a Route 
> Pattern with # at end but they don’t seem to want to remember to use it!
> 
>  
> 
> I assume a restart of services is not required when changing T302…
> 
>  
> 
> International Dial Plans
> 
> http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/idp/v4/deploy/dpdep421.html
> 
>  
> 
> ------------------------------------------------------------------------
> 
> * Disclaimer: This e-mail communication and any attachments may contain 
> confidential and privileged information and is for use by the designated 
> addressee(s) named above only. If you are not the intended addressee, 
> you are hereby notified that you have received this communication in 
> error and that any use or reproduction of this email or its contents is 
> strictly prohibited and may be unlawful. If you have received this 
> communication in error, please notify us immediately by replying to this 
> message and deleting it from your computer. Thank you. *
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip