[cisco-voip] sample value for international deployments inter-digit timeout T.302

[Mike Brooks]

The default T302 inter-digit timeout in Callmanager is 15000 ms (15
seconds).  We have changed it to 4000 ms (4 seconds).  In our
deployments.

Regards,
Mike

On 8/19/08, Jason Aarons (US) <jason.aarons at us.didata.com> wrote:
>
>
>
> Any have recommended value for the T302 inter-digit timeout in Callmanager?
> I reduced from default 180000ms to 90000ms but they say it's still to long.
> Thinking about 60000ms….I already have a Route Pattern with # at end but
> they don't seem to want to remember to use it!
>
>
>
> I assume a restart of services is not required when changing T302…
>
>
>
> International Dial Plans
>
> http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/idp/v4/deploy/dpdep421.html
>
>
>
>
> ________________________________
>
>
>
>
> Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>