[cisco-voip] VWIC2-2MFT-T1 Voice/Data Clocking

[Turpin, Mark]

Someone posted earlier about the independent keyword.  I forgot about
that tidbit but that's what you're looking for.

 

 

--

MARK TURPIN  |  Systems Engineer  |  CCIE 21649 (Voice)  |  Calence /
Insight Networking Solutions  | www.calence.com  

t. 314.656.2315   c. 314.660.5800   f. 314.656.2355
mark.turpin at calence.com

 

The information contained in this message and any attachment may contain
privileged or confidential information protected from disclosure. If you
are not the intended recipient, or an employee or agent responsible for
delivering this message to the intended recipient, you are hereby
notified that any review, dissemination, distribution or copying of this
information is strictly prohibited.  If you have received this
transmission in error, please notify the sender immediately by replying
to this message and destroying the original and all copies.  Thank you.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Carter, Bill
Sent: Friday, August 22, 2008 4:09 PM
To: Paul; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] VWIC2-2MFT-T1 Voice/Data Clocking

 

On the data circuit have tried clock source line and clock source
internal

 

 

 

From: Paul [mailto:asobihoudai at yahoo.com] 
Sent: Friday, August 22, 2008 3:26 PM
To: Carter, Bill; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] VWIC2-2MFT-T1 Voice/Data Clocking

 

Not to sound silly or anything but what have you tried so far to tackle
this problem?

 

----- Original Message ----
From: "Carter, Bill" <bcarter at sentinel.com>
To: cisco-voip at puck.nether.net
Sent: Friday, August 22, 2008 12:46:16 PM
Subject: [cisco-voip] VWIC2-2MFT-T1 Voice/Data Clocking

Any solution... VWIC2-2MFT-T1, port 0 Data T1, port 1 Voice PRI. Getting
lots of slips and CRC errors 0/0/0 data t1 port.

 

I have

network-clock-participate wic 0

network-clock-select 1 t1 0/1/0

 

controller T1 0/0/0
framing esf
linecode b8zs

clock source line
channel-group 1 timeslots 1-24
!
controller T1 0/1/0
framing esf
linecode b8zs

clock source line
pri-group timeslots 1-24

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080822/d8f1a9b8/attachment.html>