[cisco-voip] VWIC2-2MFT-T1 Voice/Data Clocking

[Paul]

Actually if it was a drop and insert card you can do data on one and voice on the other...so sayeth the Cisco documentation. . . 



----- Original Message ----
From: Voice Noob <voicenoob at gmail.com>
To: "Carter, Bill" <bcarter at sentinel.com>
Cc: cisco-voip at puck.nether.net
Sent: Friday, August 22, 2008 1:52:06 PM
Subject: Re: [cisco-voip] VWIC2-2MFT-T1 Voice/Data Clocking


You can not do what your are doing. You will get slip errors if you try to run data on one port and voice on another port on the SAME card. You need two cards with one prort each. 


On Fri, Aug 22, 2008 at 2:46 PM, Carter, Bill <bcarter at sentinel.com> wrote:

Any solution... VWIC2-2MFT-T1, port 0 Data T1, port 1 Voice PRI. Getting lots of slips and CRC errors 0/0/0 data t1 port.
 
I have
network-clock-participate wic 0
network-clock-select 1 t1 0/1/0
 
controller T1 0/0/0
framing esf
linecode b8zs
clock source line
channel-group 1 timeslots 1-24
!
controller T1 0/1/0
framing esf
linecode b8zs
clock source line
pri-group timeslots 1-24
 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080822/53f4aaa8/attachment-0001.html>