[cisco-voip] VWIC2-2MFT-T1 Voice/Data Clocking

[Jason Aarons (US)]

This card has a single PLL.  Doing what it's supposed to.

 

You can buy another MFT card and move something.

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Carter, Bill
Sent: Friday, August 22, 2008 3:46 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] VWIC2-2MFT-T1 Voice/Data Clocking

 

Any solution... VWIC2-2MFT-T1, port 0 Data T1, port 1 Voice PRI. Getting
lots of slips and CRC errors 0/0/0 data t1 port.

 

I have

network-clock-participate wic 0

network-clock-select 1 t1 0/1/0

 

controller T1 0/0/0
framing esf
linecode b8zs

clock source line
channel-group 1 timeslots 1-24
!
controller T1 0/1/0
framing esf
linecode b8zs

clock source line
pri-group timeslots 1-24

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080822/2a8c31ad/attachment.html>