[cisco-voip] VWIC2-2MFT-T1 Voice/Data Clocking

[Tim Smith]

http://www.cisco.com/en/US/products/hw/modules/ps2617/products_configuration_example09186a008052c920.shtml

Are you able to specifiy the independant keyword in the clock source?

It does say no voice features can be used on the controller.. but maybe you
can turn it on for t1 0/0/0 only
And leave the voice controller as is.

Havent done it myself, but worth a quick look.

Cheers,

Tim

On Fri, Aug 22, 2008 at 9:46 PM, Carter, Bill <bcarter at sentinel.com> wrote:

>  Any solution... VWIC2-2MFT-T1, port 0 Data T1, port 1 Voice PRI. Getting
> lots of slips and CRC errors 0/0/0 data t1 port.
>
>
>
> I have
>
> network-clock-participate wic 0
>
> network-clock-select 1 t1 0/1/0
>
>
>
> controller T1 0/0/0
> framing esf
> linecode b8zs
>
> clock source line
> channel-group 1 timeslots 1-24
> !
> controller T1 0/1/0
> framing esf
> linecode b8zs
>
> clock source line
> pri-group timeslots 1-24
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080822/b8bcfe71/attachment.html>