[cisco-voip] VWIC2-2MFT-T1 Voice/Data Clocking

[Voice Noob]

You can not do what your are doing. You will get slip errors if you try to
run data on one port and voice on another port on the SAME card. You need
two cards with one prort each.

On Fri, Aug 22, 2008 at 2:46 PM, Carter, Bill <bcarter at sentinel.com> wrote:

>  Any solution... VWIC2-2MFT-T1, port 0 Data T1, port 1 Voice PRI. Getting
> lots of slips and CRC errors 0/0/0 data t1 port.
>
>
>
> I have
>
> network-clock-participate wic 0
>
> network-clock-select 1 t1 0/1/0
>
>
>
> controller T1 0/0/0
> framing esf
> linecode b8zs
>
> clock source line
> channel-group 1 timeslots 1-24
> !
> controller T1 0/1/0
> framing esf
> linecode b8zs
>
> clock source line
> pri-group timeslots 1-24
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080822/c0b572c8/attachment.html>