[cisco-voip] H323 to CM 6.1.2

[Ryan West]

Debug isdn q931 to make sure that your system is generating the message, make sure it's actually hitting your gateway.  Did you reboot your router after making the change?

-ryan

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: Monday, August 25, 2008 2:23 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] H323 to CM 6.1.2

I have a VGW (CMM) with a couple PRI's connected to my new CM 6.1.2 cluster.

I am having reports of calls not going through.(your call cannot be completed as dialed).

All I did on the dial peers was change the IPV4:(new server cluster IP).  All looks good

is it an IOS issue or a CM issue.

I call a DID and get the message and call it again and it works.  I thought it was my cell phone, but I'm getting more reports of it.

if anyone can give me a starting spot, I would like to trouble shoot this.

TIA

Scott
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080825/09aaec6e/attachment-0001.html>